Step 6 in Building the Dream Water Garden – Water Treatment

08/16/2017

It is imperative to the health of fish and plants to keep your pond's water clean and clear.

  1. Dechlorinate The Water – Once you have filled the pond, remove harmful chlorines and chloramines that are inherent to tap water. Little Giant’s liquid dechlorinator will remove these harmful properties. Use the dechlorinator any time you add water to the pond. Follow the application instructions on the bottle.Pond 3
  2. Test The Water – Little Giant’s test strips will give you a reading on the pH level, nitrite level, and buffering capacity of your pond. The buffering capacity is the alkalinity level, which helps prevent large pH swings.
  3. Buffer The Pond – Add Little Giant’s buffer to maintain a buffering capacity of 80-240 ppm (parts per million). A properly buffered pond will resist changes in pH due to acid rain and other external factors.
  4. Adjust pH Level – If the level is not above 6.5, apply Little Giant’s pH Increase by following bottle application rates. You should not change the pH level more than .2 points per day. A drastic change can cause stress and possibly harm your fish. A pH reading of 7.0 is optimal.
  5. Add Water Clarity Products – Flocculants will help clear and maintain the ugliest of dirty water problems. Be sure to clean your mechanical filter system multiple times after using a flocculant.

Success Story: Zero Extinctions, One Pump at a Time

08/09/2017

The Turtle Survival Alliance had a challenge, and Franklin Electric’s Little Giant® brand is providing the solution. The nonprofit organization recently needed to improve the habitat for some of the most endangered turtles in the worldOutdoor Living Web Story Photo because the water quality in their ponds was not optimal for the turtles. The previous pumps could not hold up, and weren’t providing the environmentally safe, yet simple-to-maintain production needed. We donated 12 Little Giant F-Series Pumps and it’s already making a difference.

Click here to read Pond Trade magazine’s full coverage of the story.

Benefits the F-Series Pumps are Providing

  • Creating more stress-free environments that simulate the turtles’ natural habitats, including those as needed for 21 of the world’s 25 most critically endangered species
  • Supporting ponds from 7,000 to 30,000 gallons
  • Providing energy-efficient pumping that can run continuously and is environmentally safe
  • Offering flexibility to meet a variety of pumping applications on-site

We also recently created a video telling this amazing story, featuring Nathan Haislip, Facilities Manager and Lead Keeper of the Turtle Survival Center. Click here to view the video.

Step 5 in Building the Dream Water Garden – Filtration Type

07/18/2017

Along with a pump, the filter is one of the most important components in maintaining a healthy, clear pond.

  1. Mechanical Filter – Called a mechanical filter because it physically traps the pieces of debris and algae in the Pond 5 JPGwater. Most are designed to filter water before it enters the pump. This helps keeps fountain heads, as well as the pump, clear of clogging debris. This type of filter should be ran continuously while the pump is in operation.
  2. Biological Filter (preferred for ponds containing fish) – Called a biological filter because it provides an environment for “good” bacteria to colonize. These good bacteria work to break down harmful ammonia into nitrites, then nitrates, a great fertilizer for pond plants. This type of filter needs to operate on a continuous basis (24 hours a day), otherwise the colonized bacteria will decrease.
  3. Combination Filters – Some filters utilize both forms of filtration by having mechanical filter media precede the biological section of the filter. Therefore, combining the best of both worlds, you minimize negative debris clogging while maximizing plant and fish life.

Step 4 in Building the Dream Water Garden – Selecting the Correct Pump

06/26/2017

Selecting the correct type of pump for the water garden is imperative to maintaining a healthy pond. Listed below are a few important tips for selecting the right pump for your needs:

  1. The pump is the heart of any water garden. Little Giant recommends that the water garden have two pumps if you are planning a water feature (fountain, waterfall, pond ornament, etc.): one for filtration and one for the  Pond 3feature. Larger pumps can support filtration and a water feature at the same time.
  2. For ponds larger than 1,000 gallons, the water should be filtered at least once an hour. This means that if you
    have a 2,000-gallon pond, you should have at least a 2,000-gallon-per-hour (GPH) pump. Water gardens less than 1,000 gallons need to be filtered 2-3 times an hour. The smaller the pond the more frequent the flow. To calculate your gallons, use this equation: 
    L x W x avg D x 7.48 = gallons
  3. The height at which the water is discharged above the pond affects the amount of water a pump will move. Normally, the higher the water is pumped above the water surface, the lower the amount of water it can pump. Therefore, if the top of your stream is 5 vertical feet higher than your pond, you should select a pump satisfying your flow needs at 5 feet. E.g. 2,000 gph at 5 feet.
  4. When selecting the ideal pump, it is better to oversize slightly than undersize it. For example, a pump rated at 700 gph can be reduced to 625 gph, but a pump rated at 500 gph cannot produce the extra flow needed.

Step 3 in Building the Dream Water Garden – Installing the Pond Liner

06/15/2017

Now that you’ve excavated the pond like a pro, the next step is installing the pond liner. When building a pond, liner sizing is crucial and, if done correctly, it will help you set the stage for the addition of water and overall pond decorations:

1. When building a pond, liner sizing is crucial. To calculate the required liner size for the pond, use the following formula:

Length of Pond + (Depth x 2) + 2 Feet = Length of Liner
Width of Pond + (Depth x 2) + 2 Feet = Width of Liner

Calculate your stream liner using the length and width of your stream. Add 10% to the liner square footage to determine your underlayment needs.Pond 2

2. Make sure the interior walls and bottom of the pond are smooth and free of rocks or debris. If roots are visible, trim them back below the earth’s surface.

3. Underlayment will help aid in the smooth installation of your liner. Place the underlayment in first.

4. Utilize multiple people to assist in placing the liner into the pond. EPDM liner weighs a third of a pound per square foot. A 15x15 piece weighs 68 pounds. With people on each side, lightly feather the liner to get air under it. Then “float” the liner in place.

Step 2 in Building the Dream Water Garden – Excavating the Pond

06/07/2017

Once you’ve chosen the perfect location for the new water garden, it’s time to start the excavation process. The steps below will help you set the foundation for a professional-looking pond:

  1. Use a garden hose, string, chalk powder and/or spray paint to lay out the shape of the pond for digging. Adjust as necessary to avoid roots, utilities, and other obstacles during installation. Don’t forget to call 811 before you dig!
  2. Excavate the soil to about 8 inches deep: Hint: that is thePond 1 standard depth of a shovel head. Decide where the level shelf or shelves will be. Make them shapely large so you can enter and exit the pond safely…and don't forget a location to place plants. Paint the next level and dig it out 8 inches. Repeat this process until you reach the desired depth.
  3. As you excavate the pond, it is important to cut a shallow edge at about 1-4 inches deep and 12-15 inches wide beyond the pond rim for coping. This will allow you to place rocks around the edge, keeping the liner out of sight.
  4. A standard water garden depth is 24 inches (2 feet), but check your local codes for requirements. Use a string level to ensure that you will have a uniform water level with respect to your skimmer opening and the pond edge. If you are constructing a waterfall or stream, be sure to move the excavated dirt to its location and begin forming the shape.

New Video: Little Giant Pumps Helping Prevent Turtle Extinctions

05/26/2017

What an amazing cause! Franklin Electric recently partnered with the Turtle Survival Alliance (TSA) – a nonprofit Outdoor Living Web Turtle Video Photoorganization focused on achieving zero turtle extinctions – to improve the habitat for some of the most endangered turtles in the world.

Click here to see an awesome video covering our partnership!

Why is this Important?
Turtles have been roaming the water and earth for nearly 220 million years, making them one of the oldest species and one of the few to outmatch the dinosaurs in existence duration. They are essential to our ecosystem, helping clean up the environment by serving as aquatic scavengers. And yet, more than 50 percent of the 330 species alive today are threatened with endangerment. The TSA’s South Carolina location, known as the Turtle Survival Center, houses nearly 650 freshwater turtles and tortoises, including 21 of the world’s 25 most critically endangered species. Franklin Electric recently donated 12 Little Giant® F-Series Pumps to help create more stress-free environments that simulate their original habitat. F-Series Pumps are energy efficient, ideal for almost any application, oil free and safe, and require little maintenance. Check out the video to see the impact our pumps are making on a global scale.

New President: Don Kenney Appointed New Leader of North America Water Systems

05/08/2017

Don Kenney Franklin ElectricFranklin Electric has appointed Donald P. Kenney as President, North America Water Systems. In this role, Kenney will be responsible for all aspects of the North America Water Systems business that supports the sale of Franklin Electric products – including the Little Giant® brand – to customers in Canada, the United States, Mexico, and Central America.

Kenney was hired as FE Petro employee number five in 1991. Over the years, he has assumed increasing levels of responsibility, becoming President of FE Petro in 2001, and then President of Franklin Fueling Systems in 2005. In 2013, Kenney was appointed a Vice President of Franklin Electric Co., Inc. and promoted to President, Energy Systems.

Step 1 in Building the Dream Water Garden – Finding the Perfect Location

04/15/2017

It’s time to start thinking about a location for that dream water garden. The following tips will help you plan where to build it:

  1. Learn how the sunlight travels across the yard and what direction water run-off drains to. The water garden should be located where interation can be made by a patio or deck and with a pleasant view from a window Little Giant Koi Pondinside.
  2. About 5 to 6 hours of sunlight per day is important for fish and plant life. When excessive amounts of sunlight are present, floating plants and lilies can help reduce exposure which could prevent algae blooms.
  3. Prevent site run-off from entering the pond. Chemicals and other debris from the yard can affect the natural balance of the pond. Also consider where the overflow from the pond will go after a heavy rain.
  4. Trees are a great shade tool in any landscape and their leaves and twigs can find their way into the pond. Design and install the proper filtration components, such as a skimmer, to ensure a pleasant ponding experience with minimal maintenance.
  5. Don’t forget to check local regulations. There may be design restrictions in your area or a building permit may be required. Always remember to dial 811 before you dig. Know what’s below.

New Little Giant® Aeration System Keeps Bodies of Water Clean & Healthy

10/10/2016

Franklin Electric is pleased to announce the launch of the Little Giant® Aeration System. This multi-functional aeration and fountain system is capable of moving up to 500 gpm – great for bodies of water up to half an acre in size. With the easy installation of a fountain nozzle, the aerator is transformed into an attractive fountain display. Whether the primary goal is aesthetics or biological pond health, Little Giant offers this easy-to-use, reliable, all-in-one solution to keep water clean and healthy.

Features
• All-in-one packaged system (float, aerator, Franklin Electric motor)Lake Aeration
• Ready out of the box
• Easy installation
• Simple sizing: 1/2 hp per 1/2 surface acre

Benefits
• Aeration/fountain interchangeability
• Enhances biological activity
• Improves water quality
• Multiple visual options
• Simplifies maintenance in water
• Plug-and-play, no control box required

Easy Fountain Pump Conversion
• Optional fountain conversion kit includes: pump head, nozzle stem, and Sonata, Cantata, and Concerto fountain nozzles
• Easy nozzle installation
• Multiple nozzle options

Want to see the new Little Giant Aeration System in action? Click here to view the video.
For more information about the product, click here.